K30

More Channels

are Available

The integrated advanced 1598-channel GNSS technology helps K30 to collect signal from GPS, Glonass, Beidou, Galileo, QZSS, in particular the latest BeiDou III. It greatly improved the data quality and satellite signal capturing speed of GNSS surveying.

Intuitive and Vivid

Screen Display

K30 has a 1.3 inches colorful sreen, which displays measurement data and settings completely and provides a clear visibility under sunlight. It makes sure that all informations are in your control.

More Freedom

to Operate

By using the touch screen on K30, users are able to operate GNSS receiver like their smart phone. Using both of touch screen and key buttons will make your workflow easier and faster.

kFill, Save RTK

Correction Signal Loss

Kolida's kFill technology is able to provide a 5-minutes sustainable high accuracy service during a temporary RTK or VRS signal coverage outtages. After the correction data signal recovers, receiver will switch to real time correction data connection seamlessly.

Down to 4-10 cm

Positioning by L-band

Thanks to the newly developed BDS correction service, K30 is able to receive B2b signal via L-band, and perform a single point positioning precisely without base station.

It is a great help to surveyors who work in particularly difficult areas. This service is available in 2022 in Asian-Pacific region.

New Radio,

Farlink Tech.

Farlink technology is developed to send large number of data and avoid data loss.

This new protocol improves the signal-catching sensitivity from -110db to -117db, so K30 can transmit to 10 km away by only 1 watt power consumption and to 15 km away by 3 watt power (in optimal environment condition).

Working Longer,

Stop Less.

Thanks to the low consumption operation system design, K30 can work up to 10 hours in RTK base mode and up to 25 hours in rover mode, up to 27 hours in static mode. (Environment temperature is 25℃)

K30 can be recharged by Type-C USB connector.

Constantly Upgraded

Inertial Measurement

KOLIDA’s 3rd generation inertial sensor and algorithm are onboard now. The working speed and stability have been improved for 30% from the last version. When the GNSS fixed solution is lost and recovered again, Inertial sensor can remain the working status in a few seconds, no need to spend time to reactivate it...

Tilt angle is up to 60 degrees, accuracy is down to 2-3cm (when tilt angle is within 30°), 5cm (tilt angle within 60°)